​​Z-3 MAX - PURE POLYUREA COATING

A two-component, rapid curing, elastomeric pure polyurea lining system. Z-3 MAX is a 1:1 ratio designed to be sprayed with high pressure plural component spray equipment. Thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.

  • Robust application window with ability to spray at low temperatures and high humidity
  • Secondary containment as a monolithic, impermeable lining for industrial plant, agriculture, and petrochemical applications
  • Excellent wetting properties for geotextile fabric
  • High physical properties including tensile, tear, and elongation properties
  • Excellent abrasion and impact resistance


VIEW SPEC SHEET

Z-3 HYBRID - POLYUREA HYBRID COATING

Z-3 HYBRID is a one to one volume ratio, two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing, elastomeric hybrid polyurea lining system. Provides a cost-effective, environmentally sound solution to commercial and industrial applications where maximum corrosion and abrasion protection is required.

  • High tensile strength and tear strength properties
  • Very good abrasion and impact resistance
  • Excellent corrosion resistance


VIEW SPEC SHEET

X-1 FLEXGRIP - POLYUREA HYBRID COATING

X-1 FLEXGRIP is a one to one ratio, two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing, elastomeric hybrid polyurea lining. It has excellent impact, abrasion and corrosion resistance, and provides a high level of skid resistance, sound deadening, and vibration absorption. Its formulation is extremely flexible while maintaining its integrity under repeated flexing, regardless of film thickness.

  • Elastomeric properties allow for application to surfaces subject to: vibration, expansion, contraction, movement, flexing, abrasion and impact
  • Aggressive non-slip performance can be achieved with aggregate integrated into lining
  • Excellent protective lining for abrasion, impact and corrosion resistance


VIEW SPEC SHEET

Z-7 HARDCOAT - PURE POLYUREA COATING

Z-7 HARDCOAT is a high-modulus thermoset spray applied plural-component aromatic polyurea elastomer used as an abrasion, impact and moisture resistant coating for multiple substrates. This rapid curing, 1:1 volumetric ratio system is designed to be sprayed with high pressure plural component spray equipment. Z-7 HARDCOAT delivers superior stiffness and corrosion resistance. It forms a seamless, monolithic membrane with water and chemical resistance. Thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.

  • Robust application window with ability to spray at low temperatures -20° F ( -29° C) and high humidity
  • Fast-set: handle within 60 seconds or less
  • Temperature stability to -40° to 230° F (-40° to 110° C) with intermittent temperatures to 300° F (148° C)


VIEW SPEC SHEET

Z-5 UV - ALIPHATIC POLYUREA COATING

Z-5 UV is a two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing, polyaspartic polyurea lining system. Z-5 UV is based on aliphatic chemistry which has excellent color and gloss stability. This product combines the durability of a tough polyurea elastomer with excellent color and gloss stability of a topcoat into one product. An ideal coating for applications that require a UV-stable, high-gloss finish.

  • Excellent color and gloss retention for both light and dark colors
  • Excellent corrosion, impact and abrasion resistance
  • Spray-on application creates a monolithic, seamless lining which conforms to any shape and size
  • Combines the durability of a tough polyurea elastomer with excellent color and gloss stability

Protective Coatings - Industrial solutions